Self-Aligning Pads adjustable, self-resetting
EH 22741.
Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements.
By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece.
Your selection resulted in 21 hits
Version
Material
d1 [mm]
l [mm]
l1 [mm]
Load capacity for static load max. [kN]
More details
Article-No.
CAD / Documents
Price
[€]
Available
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0013
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- Ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0016
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22741.0017
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 56 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22741.0024
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- Ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 128 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0030
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 273 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0036
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 466 g
Version:
with flat-faced ball, bearing surface plain
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22741.0046
- with flat-faced ball, bearing surface plain – picture 1, Heat-treated steel
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- Ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 885 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0113
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- Ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0116
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22741.0117
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 56 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22741.0124
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- Ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 128 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0130
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 273 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0136
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 466 g
Version:
with flat-faced ball, bearing surface plain
Material:
Stainless steel 1.4057, heat-treated
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22741.0146
- with flat-faced ball, bearing surface plain – picture 1, Stainless steel
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- Ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 885 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M8
l [mm]:
36.6 mm
l1 [mm]:
25 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0313
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M8
- l: 36.6 mm
- l1: 25 mm
- d2: 5.8 mm
- e: 14.5 mm
- Ball diameter: 8.5 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 25 Nm
- Weight: 20 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M10
l [mm]:
45.7 mm
l1 [mm]:
30 mm
Load capacity for static load max. [kN]:
8 kN
Article-No.:
22741.0316
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M10
- l: 45.7 mm
- l1: 30 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 8 kN
- Tightening torque max.: 46 Nm
- Weight: 44 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M12
l [mm]:
50.7 mm
l1 [mm]:
35 mm
Load capacity for static load max. [kN]:
15 kN
Article-No.:
22741.0317
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M12
- l: 50.7 mm
- l1: 35 mm
- d2: 8.6 mm
- e: 19 mm
- Ball diameter: 12 mm
- Load capacity for static load max.: 15 kN
- Tightening torque max.: 82 Nm
- Weight: 56 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M16
l [mm]:
60.7 mm
l1 [mm]:
40 mm
Load capacity for static load max. [kN]:
25 kN
Article-No.:
22741.0324
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M16
- l: 60.7 mm
- l1: 40 mm
- d2: 10.5 mm
- e: 27 mm
- Ball diameter: 16 mm
- Load capacity for static load max.: 25 kN
- Tightening torque max.: 206 Nm
- Weight: 128 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M20
l [mm]:
77.3 mm
l1 [mm]:
50 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0330
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M20
- l: 77.3 mm
- l1: 50 mm
- d2: 20 mm
- e: 33 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 407 Nm
- Weight: 278 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M24
l [mm]:
100 mm
l1 [mm]:
70 mm
Load capacity for static load max. [kN]:
90 kN
Article-No.:
22741.0336
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M24
- l: 100 mm
- l1: 70 mm
- d2: 20 mm
- e: 40 mm
- Ball diameter: 25 mm
- Load capacity for static load max.: 90 kN
- Tightening torque max.: 698 Nm
- Weight: 466 g
Version:
with flat-faced ball, bearing surface ribbed
Material:
Heat-treated steel, tempered, phosphated
d1 [mm]:
M30 x 1,5 mm
l [mm]:
100 mm
l1 [mm]:
65 mm
Load capacity for static load max. [kN]:
165 kN
Article-No.:
22741.0346
- with flat-faced ball, bearing surface ribbed – picture 2, Heat-treated steel
- d1: M30 x 1,5 mm
- l: 100 mm
- l1: 65 mm
- d2: 34.6 mm
- e: 51 mm
- Ball diameter: 40 mm
- Load capacity for static load max.: 165 kN
- Tightening torque max.: 1355 Nm
- Weight: 915 g
Material
Spring element
- Thermoplastic PUR
Ball
- Ball-bearing steel, hardened, bright
- Stainless steel 1.3541, nickel-plated
Body
- Heat-treated steel, tempered, phosphated
- Stainless steel 1.4057, heat-treated
Nut
- Steel, blackened (ISO 4035)
- Stainless steel
Notes
Ball protected against rotating.
Loading capacity valid for steel and stainless steel designs.
Special types on request.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.